Failed Fractured Abutment Screw Recovery Attempt with Salvin Screw Recovery Kit – 0034
This implant case exemplifies a Failed Fractured Abutment Screw Recovery attempt with a Salvin screw recovery kit.
This implant case exemplifies a Failed Fractured Abutment Screw Recovery attempt with a Salvin screw recovery kit.
This case exemplifies a fractured abutment screw case initially attempted with a generic recovery kit and no microscopic visualization.
This implant mechanical rescue case illustrates an example of an Iatrogenic Failure Caused by Misinformation.
This case illustrates an example of an Iatrogenic mechanical failure when a conical abutment was used on a TSV implant.
This case illustrates an example of a Mechanical Assessment of a Straumann RC BL Case Where Two Abutments had Failed in Two Years.
This case illustrates an example of an Accidental Iatrogenic Placement of Four Trilobe Locator Abutments into Nobel Conical Implants.
This case illustrates another example of a Fractured TiBase abutment requiring an IMR (implant mechanical rescue) by Dr. Mastrovich.
This case illustrates how wrong restorative components led to two abutment screw failures in two years leading to an abutment screw rescue.
The patient presented on referral for identification of the implant in the #8 site and recovery of a fractured abutment and retained abutment screw which had lost its drive geometry.
The patient presented for retrieval of a fractured healing abutment screw from a Straumann 4.1 RC BL implant in the #13 site